
Boveda Leakproof Holder For Instruments: In Case
Watch Now
Why use a Boveda Fabric Holder?
Specially designed to extend the life and efficiency of humidity packs for acoustic guitars, large fretted or bowed wood instruments and large woodwinds. Boveda Fabric Holders are lined with a liquid barrier to further protect your instrument in the rare occurance a leak-proof pack is ever punctured.
Information
HOW TO USE:
BEFORE USING BOVEDA:
Some Boveda are individually overwrapped. Remove the clear overwrap from the pack before using Boveda in your holder. (DO NOT OPEN the Boveda itself.)
- ALWAYS insert Boveda into a leakproof holder before using in an instrument case. The holder acts as a liquid barrier if a packet is accidentally punctured while extending the life of your Boveda packets.
- DO NOT mix different Boveda RH levels within the same instrument case.
- DO NOT use other humidification products with Boveda in the same case because they will fight against each other and reduce the efficiency of Boveda.
STEP-BY-STEP INSTRUCTIONS
Double Holder:
- Insert one (1) unwrapped B49 or B49HA refill pack into each pouch of the leakproof holder. (Packs sold separately here.)
- Place in the case anywhere that allows for airflow and prevents puncture when you close the case:
- Drape over the strings and into the sound hole
- Under the neck, headstock or tailpiece
- Across the strings or entire instrument
- Around tuning pegs
- Into a hollow of the case - Close the case's lid. Always keep your case closed when using Boveda.
Single Holder:
- Insert one (1) unwrapped B49 or B49HA refill pack into the leakproof holder. (Packs sold separately here.)
- Fold the top over, so the hook and loop fasteners meet to close the holder.
- Use the strap to securely hold Boveda over an instrument’s sound hole or along the bridge, neck joint or fingerboard.
- OR -
Place the holder in the case anywhere that allows for airflow yet prevents puncture when you close the lid. - Close the case's lid. Always keep your case closed when using Boveda.
Mini Holder:
- Insert one (1) unwrapped B49 refill pack for bows and small woodwinds into the opening of the leakproof holder. (Packs sold separately here.)
- Make sure the top flap of the holder covers the pack so it doesn't slip out.
- Place the Boveda holder in your bow tube or woodwind case in an open area or fold the holder to fit inside.
- Allow space within the case to avoid crimping or pinching the Boveda.
- Close the case's lid. Always keep your case closed when using Boveda.
SPECIFICATIONS:
Double Holder:
Folded: 6.625"/16.83 cm x 4.25"/10.8 cm
Unfolded: 12.5"/13.75 cm x 4.25"/10.8 cm
Single Holder:Folded: 3"/7.62 cm x 4.25"/10.8 cm
Unfolded: 6"/15.24 cm x 4.25"/10.8 cm
Mini Holder: 3.5"/8.9 cm x 3.25"/8.3 cm