Cedar Boveda Holders for Humidors

STEP 1, PREP THE HUMIDOR SURFACE:

• Use a dry cloth to wipe down the underside of the humidor lid.
• Choose either the enclosed metal or magnetic sheet to affix to the humidor, then peel off the paper backing to expose the adhesive. (If you're using the enclosed hook and loop kit, affix the soft-sided strips to the humidor.)
• With the sticky side up, apply the sheet to the humidor. Apply simultaneous pressure for 60 seconds to the sheet and the reverse side of the lid. (If you hear any cracking, back off on the pressure.)

STEP 2, PREP THE CEDAR HOLDER:

• You do not need to season the Cedar Boveda Holder before using it.
• Wipe down the holder with a dry cloth.
• Place the holder on a hard surface.
• Peel off the paper backing on the remaining sheet.
• Place the sticky side on the back of the holder and apply soft pressure for 60 seconds. (Again, if you hear any cracking, don't use as much muscle.)

STEP: 3, WAIT A DAY:

• Allow the adhesive to set for 24 hours.
• After 24 hours, slip the Boveda Size 60 into the holder. 
• Attach the back of the holder inside your humidor's lid.

• Slim Cedar Holder for Two (2) Boveda (Size 60): 7”/17.78 cm x 6”/15.24 cm x 0.6”/1.524 cm
• Stacked Cedar Holder for Four (4) Boveda (Size 60): 7”/17.78 cm  x 6"/15.24 cm x 1”/2.54 cm
• Stacked Cedar Holder for Two (2) Boveda (Size 60): 5.5”/13.97 cm x 4”/10.16 cm x 1”/2.54 cm